zf 6 speed gear box open

ZF 6 Speed Gearbox Opening Full Details Step By Step Part-1

OPENING THE ZF 6S GEARBOX 

ZF 6 Speed Gearbox Opening Full Details Step By Step Part-1 fast of all we have to open the Acciseries of ZF 6 SPEED GEAR like clutch gear housing selector assembly to open the patio assembly.

GEARBOX SLECTOR ASSEMBLY OPENING
To open the Slector Assembly, first of all, the number 13 bolt is attached, that 10 bolt has to be opened, then the selector assembly has to be pulled out and will come out easily.

CLUTCH HOUSING OPENING
To open the housing first we have to open the lock bar of the release bearing, after that we have to take out the release bearing, now we have to put the total 10 stand of 19 in the clutch gear housing to open the nut of that stand. After that we have to hit both sides lightly behind the housing from the hammer, the Clutch Housing will come out,

PTO ASSEMBLY OPENING
To open the PTO assembly we have to open 4 nuts of number 19, after that we have to hit the ZF S6 GEAR BOX PTO Assembly lightly from the rear side, the assembly will exit.

ZF GEARBOX OPENING
To open the ZF S6 GEAR BOX, we have to first loosen the ZF S6 Gearbox check nut, then open all the bolts of the top cover, the top cover is enclosed with a bolt of number 17, then lower the dowel of the top cover. Take out and take out the top cover. Now we have 6 bolts in the fork. Open the bolt of number 24 and take out the fork. Now we have to open the check net of ZF S6 Gearbox and take out the cupola. After opening all the accessories in the ZF S6 Gearbox, such as reverse gear flag, reverse gear switch and myelometer non set, then open the reverse gear plate, the reverse gear plate has 8 bolts of number 13 and then the reverse gear pin. Open the lock volt and hit the reverse gear pin lightly from the inside side. The reverse gear pin will exit, after that take out the reverse gear. Now we The Counter Assembly has to be lifted straight upwards the counter will come out, after that the mainshaft has to be removed, then the main soft has to be hit slightly from the back side of the mainshaft and the mainshaft has to be pulled directly towards you. Will go

So please watch the video below

For more information, you can visit our YouTube channel MECHANIC GYAAN or www.mechanicgyaan.com

Friends, how did you like this information, write in the comment, if you like it, like it and share it with friends, follow us to read other similar posts, what will happen, friends, whenever I upload a post, throw the notification Will find it
                                                                                           Thank you

My youtube channel

My Facebook Page

My Website

One thought on “ZF 6 Speed Gearbox Opening Full Details Step By Step Part-1

Leave a Reply

Your email address will not be published. Required fields are marked *

error: Content is protected !!