Hino Engine Setting Tippet in Two Rounds
How to set Tippet Ashok Leyland 2518 Hino engine step by step in Hindi Hello friends i am Ravi Kharkhate and today we are going to tell you with the help of a blog post how to set the Tippet Setting of Hino engine in two rounds of engine.
Engine Tippet Setting
For the Tippet Setting of the Hino engine, we have to first rotate the engine and bring it to the timing, then we will have to match the Type It Rocker and in the first round, the Tippet Setting of 6 rockers will be set in the first round and 6 in the second round. Meaning distance intel valve 0.30MM and exhaust valve 0.40MM This engine consists of total 12 rockers with 6 intel inferior 6 exhaust valves by Tippet Setting To get a 14-15 ring Tippet Setting gauge inferior screwdriver. These 3 accessories are needed, so we have to first open the top cover of the engine to do a Tippet Setting if it is to rotate the engine after the flywheel and flywheel. There remains a hole in the housing; from that hole we have to keep watching that while moving the flywheel, we have to bring the mark of 1/6 in the top.
Engine First Round Tippet Setting
In Hino engine, the front side type Tippet Setting means the first round of the Hino engine is to rotate the engine to Tippet the Setting of the first round. The 1/6 of the lower flywheel plate is to be brought into the top. To get the top mail, look in the top of the housing. As the mark of 1/6 of the top of the top is reached, at that time the engine has to stop rotating, now we have to Check the Tippet. From now on, the numbers 1 and 2 are free or not. Well if the engine is not free, then the engine will have to be rotated one round to the 1/6 mark as soon as number one and two numbers become free at that time. One number wall two number wall four number wall five number wall eight number wall number 9 is to Tippet the Setting of number wall type in the first round of the engine. We do Tippet Setting to setting on Intel valve 0.30MM or 12 Thaw similar Exhaust valve 0.45MM or 18 Thaw,
Engine Second Round Tippet Setting
To Set the Tippet of the second round of the engine, again we have to rotate the engine one round and bring it to the same mark ie one 1/6 mark. Now we have to start the Tippet Setting from the back side of the engine in the same way as we did for the engine. In the first round, now we have to start Setting The Tippet from behind. First Setting The Tippet number of 12 numbers, 11 numbers, 10 numbers, 7 numbers, 6 numbers and 3 numbers. The Tippet Setting is to set intel 0.30MM or 12 thaw and adjust 0.45MM or 18 thaw. To do the Tippet Setting, first of all loosen the lock nut, then tighten the screw, typewint will jam and screw will loosen when tippet. After setting the tippet according to the tippet edge, tighten the lock screw.
So guys, you can also Tippet Setting in two rounds of engine of Ashok Leyland 2518 Hino engine.
Friends, how did you like This information, write in the comment, if you like it, like it and share it with friends, follow us to read other similar posts, what will happen, friends, whenever I upload a post, then throw the notification Will find it