Mainsoft Assemble of Tata GB-20
To Assemble the mainsoft of tata GB-20 Gear box, first of all we have to clean the parts fitting in the mainsoft, then we have to assemble the mainsoft first we have to fitting the mainsoft from the back side of it. After wards fitting from side to side.
Main Soft Assemble Back Side
To Assemble the mainsoft back side, the main soft has to be erect so that the back of the mainsoft comes up, after that we have to start non fitting in the mainsoft. First of all we have to do a number non fitting and fastgear the needle Roller bearing is also fitted, followed by synchro hub fitting, synchro hub is followed by synchro ring fitting, synchro ring is followed by a number gear hub fitting. After fitting the non hub, the synchronous key is to be fitted in which both the synchro and synchro spring are to be held together and pressing the synchro is followed by fitting a number slider, while fitting the non slider by pressing the synchro in the ger slider. After fixing, we have to do mainshaft reverce gear fitting, after non fitting we have to make distance waster fitting then we After doing all this, the main shaft will be compacted from the rear side.
(a) Tata gb-20 gear box open step by step
(c) Tata gb-20 gear box fitting step by step
Mainsoft Assemble Front Side
To assemble the mainshaft from side to side, first of all we need to straighten the main soft so that the front part of the main soft comes up, after that we have to start fitting the main shaft. First of all we need two numbers Ger and Needle Roller The bearings have to be fitted together followed by the synchro hub fittings. The syncro hub is followed by the synchro ring fittings. The syncro rings are followed by 2 and 3 no. Gear hub fittings. After fitting the hub hub is to do the synchro kit fitting followed by Ger sliding two number three number is non fitting, after Ger sliding fitting is synchro ring three number is fitting of Ger is after synchro ring is to do synchro hub fitting. After three number fitting is to be done with needle roller bearing, now we have to do four number gear needle roller bearing sleeve fitting after that number 4 number gear Scrub and Syncro Hub Fitting Now we have to do four and five number Ger Hub Fitting, Synro Kit after Ger Hub Fitting and then Gear Sliding Fitting Four and Five Number Ger Sync Ring and Syncro Hub Fitting. To lock the main soft, after locking the lock we have to make five number ger i.e. top non fitting. Between the main shaft and top non before fitting the top gear. Dealers will find Bering,
You can complete a similar main GB Tata-20 Gear box.
Friends, how did you like this information, write in the comment, if you like it, like it and share it with friends, follow us to read other similar posts, what will happen, friends, whenever I upload a post, throw the notification to you Will find it
My YouTube Channel
My FaceBook Page