Inline Pump Timing

How To Inline Pump Timing And Fitting of Tata Cummins 6BT En

TATA CUMMINS 6BT ENGINE PUMP FITTING

How to Inline Pump Timing and pump fitting of Tata Cummins 6BT Engine Hello friends I am going to tell you today with the help of a block post how to set the Pump Timing Setting and fitting of Tata 2518 Cummins 6BT Engine step by step full details.

Pump Fitting Basic Information
To make pump fitting of Tata Cummins 6BT Engine, we have to set the timing of engine and pump. After that we have to do pump fitting. Tata Cummins 6BT Engine consists of two types of pumps (1) Rotary pump (2) In line pump. We inline today. Pump Fitting Will The first thing to do is to set the Engine Timing for Pump Fitting.

Engine Timing Settings
To do pump fitting in Tata Cummins 6BT Engine, first of all we have to open the type cover one by one, after that rotate the engine and bring the piston number 1 and 6 into the top after the piston comes in the number 1/2 and 12. If you do not see if the number is free and 11 rows are jammed by crying, then if it is not there, bring the engine to the same place by rotating one round again and check again, the engine will come in time, after which the pump in the engine will be replaced. Seems There is a small hole for mixing timing in cam soft non under it. The hole of that non is to be brought to the center of the hole of the plate, then locking the engine by inserting the timing hole and then after the Pump is Fitted the Engine To unlock

Inline Pump Timing
To do Inline Pump Fitting in Tata Cummins 6BT engine, first thing we need to do is to Set The Timing of the pump. To match the timing of the in-line pump, first of all we have to open the Pleasure Plate and then rotate the main soft of the pump until the pump If a number does not come into the planner top, as soon as a number comes into the planner top, the same means to keep 0.25mm above the top, this will make the pump advance, now we lock the pump If you want to do this, the side of the pump has a 27 number plug, open it and attach it directly to the pump lock gulli means that there is a pump locking collar in the gullie. To put a cap of 27 numbers

Inline Pump Fitting
Like we have Set The Timing of both the engine and the pump to do the Inline Pump Fitting mentioned above. Now we have to fit the pump to the engine. Now we have to fitting the pump to the direct engine. After Fitting The Pump, it is not necessary to tighten the pump gear nut from the front side, then put four nuts of pump number 17 and then keep the pump in the center. J Unlock the engine and pump after tight to give pump fittings to all not forgotten Now we take the air out of the engine start by all AC Series fittings required for Inline pumps,

Note:- When doing Pump Nozzle Service or Repair, at the time of Pump Nozzle Fitting, the diesel tank should clean the diesel line and change the screen and filter.

So friends, you can also do inline pump fitting of Tata Cummins 6BT Engine in the same way

For More information you can visit our YouTube channel MECHANIC GYAAN

Friends, how did you like This information, write in the comment, if you like it, like it and share it with friends, follow us to read other similar posts, what will happen, friends, whenever I upload a post, then throw the notification Will find it
Thank you,

My YouTube Channel

My Facebook Page

My website

Leave a Reply

Your email address will not be published. Required fields are marked *

error: Content is protected !!