TATA CUMMINS 6BT ENGINE TIPPET ADJUSTING
How To Adjust The Tippet Step by step full details of Tata cummins 6BT Engine Hello friends i am Ravi Kharkhate and today we are going to tell you with the help of a blog post how to adjust the tippet of Tata Cummins 6BT Engine.
TIPPET ADJUSTING PROCESS
To Adjust The Tippet of Tata Cummins 6BT Engine, first we have to open the tippet cover, then rotate the engine and bring it to the timing. After bringing it on the timing, we have to Adjust The Tippet of each cylinder in 6 steps. Just wall is to be Inlet Volve 025mm & Adjusted at 0.45mm. Tippet adjust engine will be completed in two rounds. In first round, tippet of cylinder is to be adjusted. A ring spener 14 -15 to the Tippett adjusting, get a Tippet gauge, and a screwdriver it must be three tools,
FIRST ROUND FIRST STEP
To Adjust The Tippet, first we have to rotate the engine slowly and bring the 1/6 number piston to the top. To check the piston at the top, press the 1 or 6 number cylinder cylinder with screwdriver as soon as the piston. The screwdriver will come in the top, you will have to rotate the engine slowly and bring the piston to the top, then start the Tippet adjust. First of all, adjust the Tippet of One number cylinder inlet and exjust wall of both the adjust wall is set to Inlet wall 0.25mm and the ExJaust wall to 0.45mm. To Adjust The Tippet, the top of the rocker has a lock nut of number 14 and it has to be loosened and the adjusting screw is adjusted according to the Tippet gauge from the screwdriver. If you tighten the screw, the Tippet will be jammed and if the screw is loosed, the Tippet will be shaken.
FIRST ROUND SECOND STEP
To Adjust The Tippet of the second step, bring the 2/5 piston to the top, now we have to press and hold the rocker of the number 2 or 5 cylinders lightly with screws and rotate the engine as soon as the piston comes into the top. Time will be known by screwdriver, now we have to adjust both types of five number cylinders in the same way as we told in the first step.
FIRST ROUND THARD STEP
To Adjust The Tippet of the third step, bring the 3/4 piston into the top, now we have to lightly press the three or four number cylinder cylinder from the screwdriver and rotate the engine slowly as soon as the piston comes into the top. At that time the screwdriver will come to know that the piston has come in the top, now we have to Adjust The Tippet of both the rocker of the three number cylinder in the same way as we told in the first step.
SECOND ROUND FIRST STEP
Just like in one round of the engine we Adjust The Tippet of 3 cylinders in 3 steps. Similarly, now we have to adjust the type of the second round as well. For adjusting the type of the first step, we have to bring 1/6 piston to the top. Another six number is to keep the cylinder’s rocker pressed lightly and the engine has to rotate slowly and bring it to the top. Now we have to Adjust The Tippet of both the rotors of the 6 number cylinder. In the same way as mentioned in the first step.
SECOND ROUND SECOND STEP
For Adjust The Tippet of the second step, 2/5 piston has to be brought into the top and the two or five number cylinders from the screwdriver have to press and hold the rotor lightly and slowly turn the engine to the top. Now we have two numbers of cylinders. The type of rocker is to be adjusted, as it was mentioned in the first step.
SECOND ROUND THARD STEP
In order to do Adjust The Tippet of the third step, 3/4 piston has to be brought into the top and the three or four number cylinders from the screwdriver have to lightly press the rocker and slowly turn the engine to the top and now we have to take both of the four number cylinders The Adjust the Tippet of the rocker is to be set as described in the first step. The firing constrain of the Tata Cummins 6BT engine is 153624,
So guys, you can do Tippet Adjusting of Tata Cummins 6BT Engine one by one.
Friends, how did you like This information, write in the comment, if you like it, like it and share it with friends, follow us to read other similar posts, what will happen, friends, whenever I upload a post, throw the notification to you Will find it